How-To: 2010 to 2012+ Camaro Steering Wheel Swap

How-To: 2010 to 2012+ Camaro Steering Wheel Swap

March 26, 2020 0 By Project FD

Disclaimer: This modification is at your own risk, we do not take responsibility for any loss of warranty, insurance coverage or injuries related to this modification.

This is a quick how-to guide on the removal of a 2010-2011 Camaro steering wheel and airbag assembly and how to install a 2012+ steering wheel and airbag assembly.

The following is required to do this modification:
2012+ Camaro Steering Wheel: All models interchange (LS/SS/ZL1) 2012+ Camaro
Airbag Unit: 23170890 or interchange

– 10mm Deep Socket
– T50 Torx Bit
– Breaker bar or impact
– Small flathead screwdriver
– Long allen key or thin flat tool to disengage airbag clips
– Torque wrench

Note: Watch the video in full before performing this installation and ALWAYS disconnect your battery prior to performing this modification. Failure to remove power has the potential to cause the airbag to deploy.

Music By:
Runaway by Diamond Ace |
Music promoted by Creative Commons Attribution
-ShareAlike 3.0 Unported